T1500Z - Coated cermet for steel

T1500Z - Coated cermet for steel
Recommended Application

Feature of Brilliant Coat

Employs new PVD process, Brilliant Coat(*)

 1. Newly developed PVD coating with excellent wear resistance and lubricity.

 2. Low reactivity with work materials for beautiful finished surfaces.

 

ballondisc

(*)There may be minor differences in the colour tone/lustre of Brilliant Coat grades due to the interference of light. Such differences have no effect on performance.

 

ApplicationRange

T1500Z

Superior turning quality thanks to Brilliant Coat, a new PVD coating with excellent lubricity.
A general purpose coated cermet grade capable of maintaining high-quality finished surfaces while providing excellent wear resistance.


T3000Z

A coated cermet grade designed with stability in mind that provides superior fracture resistance.
Covers a wide range of applications from roughing to finishing.


T1000A

An uncoated cermet grade designed with wear resistance in mind that provides long tool life and excellent wear resistance in continuous finishing and profiling applications.


T1500A

A general purpose uncoated cermet grade that provides excellent value for money and delivers improved finished-surface quality while providing good wear and fracture resistance.

SCM415 Shaft

t1500z-Ex1

Insert TNMG160408N-SU(T1500Z)
Cutting
Conditions
vc=220m/min, f=0.26 to 0.34mm/rev
ap=0.20 to 0.25mm Wet

 


 

SCM420H Automotive Component

t1500z-Ex2

Insert TNMG160408N-LU(T1500Z)
Cutting
Conditions
vc=200m/min, f=0.15mm/rev, ap=1.00mm, Wet

 


 

S48C Guide

t1500z-Ex3

Insert TPMT090204N-LU(1500Z)
Cutting
Conditions
vc=162m/min, f=0.13mm/rev, ap=0.55mm, Wet

 


 

S45C Sleeve

t1500z-Ex4

Insert DCMT11T304N-LU(T1500Z)
Cutting
Conditions
vc=230m/min, f=0.10mm/rev, ap=0.50mm, Wet

 


 

S43C Lower Shaft

t1500z-Ex5

Insert CPGT080208N-SD(T1500Z)
Cutting
Conditions
vc=140m/min, f=0.15mm/rev, ap=0.50mm, Wet

 


 

S43C Machine Component

t1500z-Ex6

Insert VNMG160408N-FL(T1500Z)
Cutting
Conditions
vc=180m/min, f=0.20mm/rev, ap=0.20 to 0.90mm, Wet

 


 

SAPH440 Press material Piston Parts

t1500z-Ex7

Standard life : Finished surface undulation

Insert DCMT11T308N-FB(T1500Z)
Cutting
Conditions
vc=360m/min, f=0.14mm/rev, ap=0.30mm(Rough) 0.02mm(Finish), Wet

 


 

SCMr420H Clutch Parts

t1500z-Ex8

Standard life : Surface properties(White turbidity and exit burrs)

Insert DCMT11T304N-FB(T1500Z)
Cutting
Conditions
vc=220m/min, f=(1)0.15mm (2)0.12mm (3)0.18mm/rev, ap=0.25mm, Wet